Usage

Installation

The easiest way this is to run the docker container and set it to restart always. This basically makes it a system service that will always run.

To make it safe and avoid passing credentials we're using a configuration file.

mkdir /etc/solaredge_modbus_mqtt
chmod 700 /etc/solaredge_modbus_mqtt
cp config.yaml-dist /etc/solaredge_modbus_mqtt/config.yaml
docker run --detach --name=solaredge_modbus_mqtt --restart=always --volume=/etc/solaredge_modbus_mqtt/config.yaml:/app/config.yaml marijnkoesen/solaredge_modbus_mqtt:latest

Configuration

modbus:
    host: 192.168.178.28     # inverter (SunSpec over Modbus TCP)
    port: 1502
    timeout: 1
    unit: 1

influx:
    url: http://influx.example.com:8086
    db: solaredge
    user: ~                   # optional basic-auth user with WRITE on the db
    pass: ~
    measurement: solaredge

poll_interval: 3

The daemon polls the inverter and writes one line-protocol point per cycle directly to InfluxDB. If InfluxDB is unreachable, points are spooled to spool.txt and replayed on the next successful write (capped at 20000 lines). Mount a volume for /app/spool.txt if backlog across container restarts matters.

model and serialnumber are written as tags; everything else as fields.

Off-grid / fail-over

• offgrid — boolean, true while the inverter runs islanded (off-grid) — vendor event bit
• error_code — inverter vendor error bitmask (0 = none), LCD-style codes
• storage_control_mode_text — e.g. Backup Only, Maximize Self Consumption
• battery1_* — SOE/SOH, power, voltage, temperatures, status of battery 1

Register addresses were validated by probing a SE10K-RWB48BFN4 (fw 0004.0025.0011) with one battery and one meter. Blocks that fail to read (flaky gateway) are skipped for that cycle; the fields are simply absent from the point.

Uninstall

docker update --restart=no solaredge_modbus_mqtt
docker stop solaredge_modbus_mqtt

Update

docker update --restart=no solaredge_modbus_mqtt
docker stop solaredge_modbus_mqtt
docker rm solaredge_modbus_mqtt
docker run --detach --name=solaredge_modbus_mqtt --restart=always --volume=/etc/solaredge_modbus_mqtt/config.yaml:/app/config.yaml marijnkoesen/solaredge_modbus_mqtt:latest

For developers

Building and running the docker image

docker build -t solaredge_modbus_mqtt:latest .
or
docker buildx build --platform linux/amd64 solaredge_modbus_mqtt:latest .

cp config.yaml-dist config.yaml
docker run --volume=$PWD/config.yaml:/app/config.yaml solaredge_modbus_mqtt:latest

Running without docker

pip3 install -r requirements.txt
cp config.yaml-dist config.yaml
python3 solaredge_modbus_mqtt.py

Running tests

pip3 install -r requirements.txt
python3 -m unittest